Plastic runway materials - how is the 400 - meter plastic track underlined?

Now the school's plastic runway is a 400 - meter plastic runway, there are many problems to pay attention to in laying, among which the drawing line is also an important link. So how do you draw lines at 400 meters of plastic runway? Let's take a look at the plastic runway materials.

Plastic runway line drawing is not an easy thing, it's really test the school floor construction technical personnel, construction personnel slightly do not pay attention to the line of point in the line drawing, it will affect the overall effect of the plastic runway.

In the special case, the drawing method and color of the point line should be drawn according to the standard of iaaf. Line wool edge, virtual edge should be treated clean. For the 400-meter standard plastic runway, it's easy to say, but it's still hard to do.

The drawing line is a fine carving procedure. Besides ensuring the accuracy of measuring instruments, equipment and tools, the construction personnel should have a strong sense of responsibility and serious work. The measuring accuracy is one in 10,000, the steel ruler should be used to fully consider the length of the ruler and the modification. After the point line is finished, three proofs should be conducted, and the line should be checked after the requirement. The spray box should be each one to ensure uniform uniformity of the arc of the runway. In the process of spraying, pay attention to the spray box to be cleaned in time, so as to avoid spraying the paint on the surface of the plastic runway to ensure the appearance of the plastic runway.

Yantai sunshine plastic co., LTD., the laying of plastic runway technology is scientific and reasonable, plastic runway materials, environmental protection plastic runway, composite products such as plastic runway, quality excellent, the service life is long, feel comfortable, good elasticity, its physical and chemical performance is reliable, high temperature resistance, cold resistance, resistance to natural aging, and high temperature 35 degrees below zero temperatures of 50 degrees still not deformation, under the condition of not breaking. Hotline: 0535-6397288.