Introduction of several common plastic runway materials.

Introduction of several common plastic runway materials.

Compound runway surface:

The two layers of material used in the rubber surface rubber bottom is elastic colloidal particles and polyurethane adhesives, 1/5 ~ 1/6 times of consumption for the rubber, made from composite elastomer cushion layer, layer 2 ~ 3 mm thick rubber laid pure (PU) mucilage, sprinkle with EPDM granule as the wear surface. The laying thickness is 13~15mm thick. Suitable for general competitions, school teaching, training sports venues.

Hybrid runway surface:

Will contain plastic pad quality 25 ~ 30% tires colloidal particles with polyurethane (PU) plastic mixing laid on the basis of the elastic body, the thickness is about 9 mm, the upper surface glue laid 2 ~ 3 mm thick pure (PU) of mucilage, and EPDM anti-slip grain as the wear surface, laying a total thickness of 9 ~ 13 mm. With moderate flexibility, easy maintenance, and saving management costs, it is suitable for all RACES, school teaching, training, etc. It is especially suitable for cement concrete foundation and asphalt foundation laying bond and long life.

Runway surface:

Breathable material used in plastic surface plastic runway is divided into two layers, the bottom is the elastic colloidal particles and polyurethane adhesives, 1/5 ~ 1/6 times of consumption for the rubber granule, paving equipment made of elastic buffer layer, the surface glue adopts pure (PU) paste with EPDM granule, the sprayer spraying on the surface of 2 ~ 3 mm thick as the wear surface. It has good elasticity, no bubble, glue surface can seepage water, after rain water phenomenon. Suitable for school teaching, training, general race track.